Note: The standalone P2S (without AMS) does not include a filament buffer.

For AMS/AMS 2 Pro owners, to connect P2S you may need to have a

Filament Buffer - P2S (SA011) and Bambu Bus Cable (CAB035).

Please be aware that the absence of the filament buffer will affect the accuracy of filament tangle detection feature.

*To connect more than 2 AMS(including AMS 2 Pro, AMS HT), Filament Buffer - P2S (SA011), a 6pin Bambu Bus Cable (CAB035) ,and a 4-in-1 PTFE Adapter (FAZ013-N) is needed.

Product Features

5-Inch Touch Screen
AI Failure Detection
Auto Flow Dynamics Calibration
Multi-Color Printing
Cold-Air Cooling
Active Venting Filament Drying
256*256*256 mm³ Print Volume

* Cybersecurity compliant with EU RED Article 3.3(d)(e). Learn more.

Highlights

5-inch Refreshed Touchscreen
Cold-Air Cooling
Engineering Filaments Ready
Quick-Swap Nozzle
PMSM Servo Extruder
Silky-Smooth Liveview
Auto Flow Dynamics Calibration
Active Venting Filament Drying
AI Error Detection

The User Experience As Good As A Smartphone.

The P2S features a fully upgraded touchscreen and a powerful processor, running our new intuitive second-generation UI. Enjoy smoother interactions, richer graphics, and clearer step-by-step instructions.

5-inch Touch Screen ｜ 2nd-Gen UI

70% More Extrusion Force & Real-Time Error Detection.

The PMSM servo extruder delivers up to 8.5 kg of maximum extrusion force—70% more than its predecessor—dramatically improves high-flowrate extrusion stability. Our proprietary servo architecture samples resistance and position at 20 kHz, actively detecting filament grinding and clogs in real time.

PMSM Servo Architecture ｜ DynaSense Extruder

Print Smooth At Every Corner, Always.

The P2S uses a high-resolution, high-frequency eddy current sensor to calibrate flow dynamics. Intelligent algorithms actively adjust the flow rate based on these readings, provide precise, consistent extrusion across every layer and corner.

Active Flowrate Compensation ｜ Eddy Current Pressure Sensorent Pressure Sensor

Off

Adaptive Airflow System

Perfect Overhang No Matter the Filament or Temperature.

Unlike traditional cooling systems that recirculate hot air, the P2S’s Adaptive Airflow System draws in cool air directly from outside the chamber. This significantly improves cooling efficiency, letting you confidently print low-temperature filaments with the door closed—without worrying about overhang quality or nozzle clogs.

Cold-Air Intake ｜ Cooling Mode

Adaptive Airflow System

50°C Chamber Ready For Engineering-Grade Filaments.

The P2S features a flap-controlled Adaptive Airflow System that efficiently seals heat within the chamber while actively filtering the internal air through a high-performance carbon filter. This allows you to confidently print demanding engineering filaments prone to warping, all while maintaining clean, safe air quality in your workspace.

Heat Preservation ｜ Carbon Filter

Peace Of Mind, Everytime You Print.

The P2S introduces advanced AI computer vision that actively detects common printing issues such as spaghetti, nozzle blobbing. It also checks your print start settings, ensuring a safe and accurate start to every print job.

AI Error Detection ｜ 2 TOPS NPU

Start Check

Spaghetti

Nozzle Clumping

Purge Chute Jam

30-Second Nozzle Swap.

The P2S features a quick-swap hotend design with a simple one-clip mechanism that releases the entire nozzle and heatsink assembly—no wiring disconnection required. This drastically reduces nozzle change time and eliminates the risk of wiring errors.

Quick Swap Hotend ｜ 1-Clip Design

No-Lag Liveview & High-Quality Timelapse.

Enhanced LED lighting dramatically improves the clarity of your liveview video and timelapses. Paired with a high-frame-rate camera & Dual-band Wi-Fi, you can comfortably monitor your printer remotely and capture beautifully illuminated timelapses perfect for sharing on social media.

"Stage" Lighting ｜ 1080P High-Rate Camera

Reliable for Fiber-Reinforced Material Printing.

P2S's extrusion system and nozzle are crafted from hardened steel, offering exceptional durability and wear resistance. Designed specifically for stable, long-term printing of high-performance fiber-reinforced materials.

Hardened Steel Nozzle ｜ Hardened Steel Extruder Gear

AMS 2 Pro

Multi-Color Printing & Filament Drying, All in One Box.

Experience our most reliable multi-color printing system yet. The AMS 2 Pro features an enhanced design for a better user experience and, crucially, introduces long-awaited filament drying. A pioneering active venting system dries filament 30% faster than sealed heating, maintaining low humidity for superior storage and print quality.

Auto Venting Filament Drying ｜ Multi-Color Printing

Electromagnetic Air Vent

Automated venting facilitates dehumidification during drying and airtight sealing for weeks of quality printing.

Faster Multi-Color Printing

The PMSM feeding motor accelerates filament feeding by 60%, saving an average of 10 minutes for every 100 filament changes.

Perfection, Detail by Detail.

The P2S features numerous refinements that enhance the user experience. While these incremental improvements may not be immediately apparent, they embody the level of perfection Bambu Lab constantly pursues.

Built-in 2-in-1 Buffer (equipped with AMS combo)
Effortlessly switch between your AMS and external filament spools for maximum flexibility.

Flat Base Plate

The smooth, flat surface makes it simple to swipe out all residue, keeping your printer clean.

Integrated Lift Handles

Designed for safe and easy transport, these sturdy handles protect your hands and provide a secure grip when moving the printer.

Shatter-Safe Front Glass

Engineered for safety, the front glass is protected by a film built to resist shattering, protecting you and your workspace.

P2S Specs

Item		Specification
Printing Technology		Fused Deposition Modeling
Body	Build Volume (WDH)	256256256 mm³
	Chassis	Plastic and Steel
	Outer Frame	Plastic and Glass
Physical Dimensions	Physical Dimensions	392406478 mm³
Physical Dimensions	Net Weight	14.9 kg
Toolhead	Extruder Gear	Hardened Steel
	Nozzle	Hardened Steel
	Max Nozzle Temperature	300 °C
	Included Nozzle Diameter	0.4 mm
	Supported Nozzle Diameter	0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
	Filament Cutter	Built-in
	Filament Diameter	1.75 mm
	Extruder Motor	Bambu Lab High-precision Permanent Magnet Synchronous Motor
Heatbed	Build Plate Material	Flexible Steel Plate

* To ensure the heatbed quickly reaches the needed temperature (35-110℃), the printer will maintain maximum power for about 3-5 minutes.

Bambu Lab P2S
AMS 2 Pro (combo version)
Filament Buffer (combo version)
Buildplate
Accessory Box
Spool Holder

Frequently Asked Questions

What materials are the P2S pre-installed extruder gears and nozzle made of?
- Hardened steel.
Does the P2S require an external power supply to use the dry filament function when connected to the AMS 2 Pro?
- You can use the AMS 2 Pro's drying function while the entire machine is in standby, though printing-related functions will be paused during drying. If you need to dry filament while printing, you'll need to purchase a Bambu Lab official power adapter to power the AMS 2 Pro.
Are the P2S buildplate and the XPA series buildplates compatible?
- The P2S buildplate's recognition function has been optimized. Older build plates do not support the type recognition feature, but their external dimensions are consistent, so they can still be used for printing.
The left side of the P2S has some mounting points. Does it support installing an auxiliary part cooling fan?
- You can purchase an official auxiliary cooling fan for upgrading.
Can the P2S use the nozzle of A1 and H2D?
- It's compatible with H2D nozzles but not with A1 nozzles.
How many AMS units can the P2S connect to at most?
- It supports connecting to 4 AMS 2 Pro units and 4 AMS HT units, totaling 8 AMS units with 20 slots. This means it supports up to 20-color printing.
Does the P2S support chamber temperature control, and how is the temperature controlled?
- The P2S does not have an active chamber heating function, but it can regulate chamber temperature through its enclosed chamber and automatic switching flap between internal and external circulation.
Why did the P2S stop using carbon rods?
- To allow for easier maintenance. Dirt residual is much simpler to clean off the surface of a smooth rod.
Will the P1S stop being sold?
- There are no plans for that at the moment. Please stay tuned for official announcements.

USA Orders

Orders to the US are subject to all US tariffs for the country of manufacture of the given product (Bambu Lab -> China). This is collected by the given freight company. CAZ 3D does not collect any duties or tariffs up front. If delivery is refused and the product is sent back to us, we will subtract shipping costs to and from the delivery location on top of a USA specific restocking fee of 25% due to additional clearance requirements.

Product Features

Highlights

P2S Specs

Bambu Lab P2S

AMS 2 Pro (combo version)

Filament Buffer (combo version)

Buildplate

Accessory Box

Spool Holder

Frequently Asked Questions

USA Orders

AMS 2 Pro
(combo version)

Filament Buffer
(combo version)

Bambu Lab P2S

Bambu Lab P2S 3D Printer